Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Aldine, TX
Gate access control in Aldine means something different than it does in Humble or Spring. The housing stock here, mostly 1960s to 1980s ranch homes and manufactured homes with aftermarket ornamental gates, was rarely built with automation in mind. Add Harris County’s expansive black clay heaving posts out of plumb, plus floodwaters that swallow underground conduit after a bayou overflow, and you get control failures that a generic technician misreads. We don’t. Call (346) 488-1637 and you’ll get a written price before any tool comes off the truck.
Why Aldine Homes Are Different
Aldine sits in unincorporated Harris County, squeezed between dense working-class residential blocks and the industrial corridor feeding Bush Intercontinental Airport. That split shows up in the gates. On the residential side, you see ornamental wrought-iron swing gates on nearly every lot, many retrofitted onto posts set decades ago without permits under historically light county oversight. Technicians here regularly open a control box and find non-standard post spacing, mismatched hinges, and wiring that follows no diagram anyone can find.
Then the clay does its work. Houston black clay expands when wet and shrinks when dry. In Aldine’s low-lying streets, where standing water lingers after any significant Gulf storm, heaving posts pull operators out of alignment every season. Couple that with chronic flood-zone conditions and you get a predictable rhythm: after any real rain event, the calls are flooded circuit boards and waterlogged operators. Knowing that rhythm, and stocking for it, is what separates a useful gate company from a dispatching service. Our home-page service standard reflects that: written price first, photo record when we leave.
Our Main Aldine Services
Most Aldine calls land on three services, and each has its own dedicated page with pricing, sub-jobs, and what the work looks like on a local property.
Gate Repair in Aldine
Repair work in Aldine usually means a swing gate that has sagged on its hinges, a post that has moved with the clay, or an operator that stopped after a storm. We see a lot of original installations with no permits and mismatched hardware, so the first step is measuring what is there before changing anything. Full details, including cost ranges and the exact repair sub-jobs, live on Gate Repair in Aldine.
Gate Installation in Aldine
New installations in Aldine have to account for the soil. Setting a post that stays plumb through a wet-dry cycle requires deeper concrete and better drainage than the original builder typically used. We quote the full job, including post work and operator, in writing before starting. See Gate Installation in Aldine for what a new gate project includes and costs.
Gate Motor & Opener in Aldine
Flooding is the main variable here. After a heavy rain that leaves Aldine streets underwater, we replace more waterlogged control boards than anything else. If your operator is newer but dead, water intrusion is the first thing we check. Pricing and motor brands are on Gate Motor & Opener in Aldine.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Aldine
Gate access control in Aldine is mostly about retrofitting automation onto gates that were never built for it. The ranch homes and manufactured homes that dominate the area got ornamental or tubular steel gates long after construction, often with whatever hardware was on sale. That means keypads mounted too low for dry wiring, photo-eyes aimed across uneven ground, and operators wired into panels that predate current code. A proper access control job here means adapting the control system to a gate that has already lived through Aldine’s clay movement and flood cycles, not assuming a clean slate. That is the work we do, and it is all covered in our Gate Access Control service hub.
Keypad Entry
Signs you need it
You are handing out remotes to everyone and losing track of who still has one.
What it costs in Aldine
Keypad entry systems in Aldine typically run $350 to $900 installed, depending on whether we are wiring a new unit or replacing an old one.
How we do it
We mount the keypad at a height that keeps wiring dry, run the circuit to the opener, program the codes, and photograph the final setup.
Phone Entry
Signs you need it
Delivery drivers or visitors cannot reach you because they have no code or remote.
What it costs in Aldine
Phone entry usually costs $600 to $1,400 in Aldine, with the range driven by whether we are adding a cellular unit or hardwiring into an existing panel.
How we do it
We install the unit at the gate, wire it to the opener, program your forwarding number, and test the call path before we leave.
What Gate Access Control Costs in Aldine
| Item | Typical range in Aldine |
|---|---|
| Keypad entry | $350 - $900 |
| Phone entry | $600 - $1,400 |
| Card reader | $450 - $1,200 |
Can you install a keypad on my existing gate even if the post has shifted?
Yes. We level the mounting surface or use spacers so the keypad sits flush and the wiring stays protected from moisture. We quote that adjustment before we start.
Will a phone entry system work if my gate is 50 feet from the house?
Usually, yes. Cellular phone entry units transmit through a cloud bridge, so distance from the house is not the issue it used to be with older hardwired intercoms. We test the signal at your gate before installation. Call (346) 488-1637 for a written quote on your exact setup.
Gate Parts & Welding in Aldine
Gate parts and welding in Aldine are a constant because the original hardware rarely matches the gate that is still standing. Homeowners retrofit ornamental gates onto whatever posts existed, and the clay movement has pulled those posts out of alignment year after year. That bends hinges, cracks welds, and breaks rollers on sliding gates. The fix is not always replacing the gate; often it is rebuilding the connection points so the gate hangs square again and the opener stops fighting itself. We handle that work through our Gate Parts & Welding service hub.
Hinge Replacement
Signs you need it
The gate drags on the latch side or the hinge pin is visibly bent.
What it costs in Aldine
Hinge replacement in Aldine runs $150 to $450 per hinge depending on the metal gauge and whether the post needs shimming.
How we do it
We cut the old hinge, align the gate, weld new heavy-gauge hinges in place, and photograph the weld before painting.
Post Replacement
Signs you need it
The post is leaning more than an inch out of plumb or the concrete base is cracked through.
What it costs in Aldine
Post replacement costs $500 to $1,400 in Aldine, including concrete work set below the local frost line and the clay’s wet-dry expansion zone.
How we do it
We remove the leaning post, dig and pour a deeper concrete footing, set the new post, and re-hang the gate the same day.
What Gate Parts & Welding Costs in Aldine
| Item | Typical range in Aldine |
|---|---|
| Hinge replacement | $150 - $450 per hinge |
| Post replacement | $500 - $1,400 |
| Rail repair | $200 - $600 |
Can you weld a gate that is still attached to the post?
Sometimes, yes. If the hinge or bracket is the only failing point, we can weld in place with the gate supported. If the post is also moving, we recommend replacing the post first. We show you photos before and after either way.
Is it cheaper to replace the whole gate than to weld several parts?
Not usually on ornamental steel. Welding four hinges and one rail costs a fraction of a new gate, and the metal left on site is often thicker than what is sold as new today. We price the repair honestly and only suggest replacement if the structure is beyond saving. Call (346) 488-1637 to get that comparison in writing for your gate in Aldine.
Brands We Service in Aldine
We service Linear, DoorKing, Viking, and other major automation brands on-site in Aldine. Stocking the specific replacement boards these units need after a flood is part of how we keep turnaround short here. See our brands for the full list.
Pricing for Gate Repair in Aldine, TX
| Service | Typical range in Aldine |
|---|---|
| Keypad entry | $350 - $900 |
| Phone entry | $600 - $1,400 |
| Card reader | $450 - $1,200 |
| Video intercom | $800 - $1,800 |
| Hinge replacement | $150 - $450 per hinge |
| Post replacement | $500 - $1,400 |
| Rail repair | $200 - $600 |
| Custom welding | $150 - $500 per hour |
| Gate rollers | $120 - $350 per roller |
Prices climb in Aldine when a gate has been out of alignment long enough to damage the opener as well, or when floodwater has corroded wiring that must be pulled and replaced. Every quote is written and handed over before any work starts, so the number on the page is the number you approve.
Neighborhoods We Serve in Aldine
We run calls across Aldine’s residential blocks and the industrial yards near the airport. Typical response is same-day on repairs and within one business day on scheduled install work.
- Northside
- East Aldine
- Greenridge
- Redwood
Service Area - Cities Near Aldine
Our crews regularly run gate repair and access control jobs in Spring, TX, Humble, TX, The Woodlands, TX, and Atascocita, TX. Each area has its own soil and plumbing patterns, but the same written-price standard applies on every job.
Serving Aldine, TX - Our Local Coverage Area
We’re based in the Aldine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Aldine
Same-day response is normal for a jammed gate or a failed operator on the residential side of Aldine. If the job needs a part we do not stock locally, we tell you the ETA before we leave and price the second trip in writing. Call (346) 488-1637 and a live person answers.
Most repairs, including hinge replacement and operator swaps, do not require a permit in unincorporated Harris County. Full new installations with poured footings can trigger county review, and we tell you at the quote stage if yours will. The written quote already lays out that scope so there is no surprise later.
Yes. That is the other half of Aldine’s gate market, and we service the heavy sliding gates on warehouse yards and fleet lots around the Bush Intercontinental corridor. High-cycle repairs often need heavier rollers and limit-switch work, which we quote the same way: in writing first.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Aldine Customers Say
"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.