Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Tomball, TX
Gate access control in Tomball usually means retrofitting an older ranch-style swing gate on a county-road frontage, or replacing a water-damaged control board on a gated community entry. The work here splits into two camps: legacy farm gates being automated for the first time, and 1990s-2010s acreage-home systems failing from black clay heave and humidity. Both need a written price before any tool comes off the truck. Call (346) 488-1637 and we’ll give you one.
Why Tomball Homes Are Different
Tomball sits at the active edge of Houston’s northwest exurban expansion, where 1-5 acre ranch-residential tracts along FM 2920, FM 149, and Old Hempstead Road are converting from agricultural use to acreage-home communities. That transition leaves a lot of manual farm gates on county-road frontages that owners now want automated, usually with a single-arm post-mount operator driving a gate that was never built to carry one.
The soil makes everything harder. Harris County’s expansive black clay swells and shrinks through Tomball’s wet-dry cycles, and gate posts heave out of plumb within a few seasons. A gate that latched cleanly in April can miss the strike plate by an inch in September. Humidity averaging over 70% year-round corrodes control-board terminals and rots rubber gaskets on underground conduit. We see the same pattern on calls: a gate that worked for a decade suddenly won’t respond, and the board terminals are green with corrosion.
Harvey left a mark too. Low-lying tracts near Tomball’s creek drainages had buried junction boxes and control boards submerged for days in 2017. Many replacements were rushed and not properly sealed. We still find those second-generation boards failing from moisture intrusion on service calls in flood-adjacent neighborhoods.
Our Main Tomball Services
Most Tomball calls start with one of three problems: a gate that won’t open, a gate that needs to exist where there isn’t one, or a motor that’s outlived its board. These are the pages we point people to.
Gate Repair in Tomball
A leaning post, a torn hinge, a strike plate that won’t catch. On Tomball’s clay, most repairs trace back to ground movement or rust. We set the gate back to plumb, replace what’s worn, and photograph the finished alignment. Details on the full repair workflow are on the Gate Repair in Tomball page.
Gate Installation in Tomball
New build on an acreage tract, or an HOA-spec ornamental iron entry in a newer master-planned community. Tomball installs usually involve either a long private driveway on FM 2920 or a gated entry where the HOA dictates materials. We quote the full scope in writing before ordering steel. See Gate Installation in Tomball for what’s included.
Gate Motor & Opener in Tomball
Tomball’s humidity is hard on operator boards, and a Harvey-era replacement that wasn’t sealed will fail eventually. We replace motors and boards across nine automation brands, and we photograph the limit-switch settings before and after. The full motor and opener service is on Gate Motor & Opener in Tomball.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Tomball
Gate access control in Tomball means keypads, remotes, phone entry, card readers, and video intercoms on gates that often started life as manual ranch gates. The specific problem here is moisture: boards and keypad housings that were never sealed for 70% humidity and Harvey-era flood exposure fail early. A keypad that works intermittently after rain is a Tomball pattern, not a fluke. We also handle the full commercial-grade documentation side of this work. If you want the broader service breakdown, see Gate Access Control.
Keypad Entry
Signs you need it
The keypad works after a dry spell and dies after rain, or one button stops registering while the rest still beep.
What it costs in Tomball
New keypad installation on an existing operator in Tomball typically runs $285-$510, and replacing just the keypad housing usually costs $110-$200.
How we do it
We test the keypad’s output at the control board, replace the unit or the cable run, seal the new housing, and photograph the wiring before we close it up.
Remote Control
Signs you need it
Remotes work from ten feet but not twenty, or one remote programs and a second one won’t hold its code.
What it costs in Tomball
Adding or programming a remote in Tomball usually runs $65-$105, and a full receiver replacement is $95-$165.
How we do it
We check the receiver’s antenna placement, clear old codes, program the new remote, and test range from both sides of the gate.
Phone Entry
Signs you need it
The gate calls the wrong number, drops the call when the visitor presses the key, or won’t let the owner buzz the gate open from a cell phone.
What it costs in Tomball
Phone entry system installation in Tomball typically ranges $550-$1,250 depending on whether the wiring is already in place.
How we do it
We mount the phone entry module, run or reuse the communication line, program the directory, and test the call-and-buzz sequence end to end.
Video Intercom
Signs you need it
The intercom audio has static whenever the gate opens, or the video feed freezes on one camera while the other works fine.
What it costs in Tomball
Standalone video intercom installation on a Tomball gate typically runs $780-$1,650, with older multi-tenant systems sometimes running higher.
How we do it
We pull the old unit, check for water in the housing, run new cable where needed, mount and aim the camera, and test the call from the house phone.
What Gate Access Control Costs in Tomball
| Item | Typical range in Tomball |
|---|---|
| Remote programming | $50-$120 |
| Standalone keypad install | $180-$1,200 |
| Video intercom install | $780-$1,650 |
Can you upgrade just the keypad without replacing the whole gate operator?
Yes. We match the new keypad to the existing operator’s input voltage and wiring, swap the unit, and leave the motor untouched. You get a written price for the keypad work alone.
Why does my keypad stop working after heavy rain in Tomball?
Humidity and flood exposure get inside the housing. We reseal the enclosure or replace the cable run, then test the keypad with the gate cycling to confirm it holds. Call (346) 488-1637 if it’s intermittent now.
Gate Parts & Welding in Tomball
Gate parts and welding in Tomball usually means hinge replacement or post repair on a gate that’s been wrenched out of alignment by black clay movement. The wet-dry cycle here is brutal on post footings, and we routinely see ranch gates whose hinges have wallowed out after years of the post leaning a little farther each season. See Gate Parts & Welding for the full parts catalog.
Hinge Replacement
Signs you need it
The gate sags at the latch end, or scrapes the ground when it swings, and the hinge bolts wobble inside the post holes.
What it costs in Tomball
Hinge replacement on a Tomball swing gate typically runs $120-$290 per hinge, including the new barrel and weld work.
How we do it
We cut the old hinge off with a grinder, true the gate with a temp support, weld the new hinge at the correct height, and photograph the final alignment.
Post Replacement
Signs you need it
The post leans visibly, the gate drags on the driveway side, or the post base shows rust through at the soil line.
What it costs in Tomball
Post replacement in Tomball typically starts around $300 and runs to $1,200 depending on the post length, concrete depth, and whether the old footing needs to be broken out.
How we do it
We saw the old post above the concrete, break out the footing, set a new post plumb in new concrete, rehang the gate, and leave a photo of the new post depth before we backfill.
Rail Repair
Signs you need it
The top rail has a crack running through a weld, or the middle rail flexes when the gate moves.
What it costs in Tomball
Rail repair in Tomball typically runs $130-$300 per rail, depending on whether we’re re-welding a cracked section or replacing the rail entirely.
How we do it
We grind the crack open, weld it full-penetration, grind it flat, and coat the repair to match the gate’s finish.
Gate Rollers
Signs you need it
A slide gate jumps off the rail, or the roller wheels have flat spots that make the gate stutter as it moves.
What it costs in Tomball
Roller replacement on a slide gate in Tomball runs $75-$220 per roller, with a typical gate needing four to six rollers replaced.
How we do it
We lift the gate with a floor jack, unbolt the old rollers, install the new set, and run the gate through a full cycle while checking the track alignment.
What Gate Parts & Welding Costs in Tomball
| Item | Typical range in Tomball |
|---|---|
| Hinge replacement (per hinge) | $120-$290 |
| Post replacement | $300-$1,200 |
| Roller replacement (per roller) | $75-$220 |
Can you weld a cracked gate rail without replacing the whole section?
Yes. We grind out the crack, weld it full-penetration, grind it smooth, and coat it to match. The repair is documented with before and after photos. Call (346) 488-1637 for a written quote.
My gate post is leaning but the gate still opens. Do I need to fix it now?
Usually yes. A leaning post on Tomball clay will keep moving, and the gate will eventually bind or jump off its hinges. Post replacement now is cheaper than a dropped gate later.
Brands We Service in Tomball
We service gates running Linear, Viking, Ghost Controls, and DoorKing operators in Tomball, among others. Common boards and remote receivers are stocked in our Houston parts inventory for same-week dispatch to Tomball. See our brands for the full list of what we work on.
Pricing for Gate Repair in Tomball, TX
| Service | Typical range in Tomball |
|---|---|
| Minor hinge/latch adjustment | $75-$150 |
| Remote replacement/programming | $65-$105 |
| Hinge replacement (per hinge) | $120-$290 |
| Keypad replacement | $285-$510 |
| Post replacement | $300-$1,200 |
| Circuit board replacement | $350-$900 |
| Full motor replacement | $650-$1,500 |
| Video intercom install | $780-$1,650 |
What pushes a Tomball job higher is usually one of three things: the post footing has to be broken out and repoured, the operator board shows corrosion from moisture, or the wiring was buried too shallow and needs a new conduit run. Every price is written and agreed before we start, and that’s the number you pay.
Neighborhoods We Serve in Tomball
We run calls across Tomball, from the acreage tracts off FM 2920 and FM 149 to the master-planned communities closer to downtown. Our dispatch is coordinated from our Houston office, and crews are in the Tomball area regularly throughout the week.
- Northpointe
- Lakewood Grove
- Wildwood at Northpointe
- The Woodlands-adjacent acreage off FM 2978
- Ranch tracts along Old Hempstead Road
Service Area - Cities Near Tomball
Tomball’s gate work doesn’t stop at the city line. We also cover Pinehurst, TX, Spring, TX, Conroe, TX, and Humble, TX, with the same written-price standard on every job.
Serving Tomball, TX - Our Local Coverage Area
We’re based in the Tomball area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Tomball
Yes. Call (346) 488-1637 and a live person answers 24/7. If it’s an emergency and we have a technician available, we’ll dispatch to Tomball the same day. We’ll tell you the price before work starts, not after.
It depends on the community. Master-planned HOAs in Tomball often specify gate materials and operator types, while acreage tracts on county roads usually don’t. We can review the HOA’s requirements with you before quoting, and the written estimate reflects any approved materials.
Cut power to the operator if it’s safe to do so, and don’t run the gate until the control board and junction boxes have been inspected. Water-damaged boards in Tomball often fail weeks or months later. We inspect, dry, and reseal the enclosure, and replace the board only if it’s actually damaged. Call (346) 488-1637 to schedule.
Call Vance Gate Repair at (346) 488-1637 for a written, upfront price on any gate access control or gate parts and welding job in Tomball.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tomball Customers Say
"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A.